499I110-P Data (RockSim)
Accuracy of this data file:
|
This File |
Certified |
± |
Diameter |
38 mm |
38 mm |
= |
Length |
606 mm |
606 mm |
= |
Prop. Weight |
327 g |
327 g |
= |
Total Weight |
824 g |
824 g |
= |
Avg. Thrust |
116.2 N |
108.5 N |
+7% |
Max. Thrust |
240.0 N |
162.6 N |
+48% |
Total Impulse |
450.4 Ns |
499.7 Ns |
−10% |
Burn Time |
3.9 s |
4.6 s |
−16% |
Add this file to my outbox.
Data Graph
File Notes
Do you have a comment on this file?
Please add a note.
Raw Data
<engine-database>
<engine-list>
<engine mfg="West Coast Hybrids" code="I110" Type="hybrid" dia="38." len="606."
initWt="824." propWt="327." delays="1000" auto-calc-mass="1" auto-calc-cg="1"
avgThrust="112.605" peakThrust="240." throatDia="0." exitDia="0." Itot="450.42"
burn-time="4." massFrac="39.68" Isp="140.46" tDiv="10" tStep="-1." tFix="1"
FDiv="10" FStep="-1." FFix="1" mDiv="10" mStep="-1." mFix="1" cgDiv="10"
cgStep="-1." cgFix="1">
<comments><![CDATA[based on CAR thrust curve & cert letter
received from WestCoast/Scott Harrison
compiled by RockSim EngEdit
hand entered data points from CAR thrust curve
approx 10% higher total impulse than cert letter
approx 5% higher total impulse than thrust curve
within a couple percent for peak & average thrust
accurate thrust profile
Andrew MacMillen NAR 77472 8/8/02
NOTE: NOT WCH, CAR, TMT OR NAR APPROVED
West Coast Hybrids I110
]]></comments>
<data>
<eng-data t="0." f="0." m="327." cg="303."/>
<eng-data t="0.05" f="240." m="322.644" cg="303."/>
<eng-data t="0.38" f="200." m="269.937" cg="303."/>
<eng-data t="0.76" f="182." m="217.245" cg="303."/>
<eng-data t="1.14" f="160." m="170.07" cg="303."/>
<eng-data t="1.52" f="142." m="128.413" cg="303."/>
<eng-data t="1.9" f="125." m="91.5835" cg="303."/>
<eng-data t="2.23" f="113." m="63.0739" cg="303."/>
<eng-data t="2.66" f="71." m="34.3538" cg="303."/>
<eng-data t="3.04" f="44." m="18.4909" cg="303."/>
<eng-data t="3.42" f="29." m="8.42147" cg="303."/>
<eng-data t="3.78" f="22." m="1.75689" cg="303."/>
<eng-data t="4." f="0." m="0." cg="303."/>
</data>
</engine>
</engine-list>
</engine-database>
You can also download the raw data points as a CSV file.